We were walking in the woods down the road the other day when we got a bit overexcited – there was a plastic sledge in the undergrowth under a holly bush! We’re far too grown-up to buy a sledge for us to play with but a found one? weeeeeee!

When we pulled it out, we found why it was under there – the plastic runners had snapped off and there were just holes the length of the sledge in their place. Cue two disappointed faces. We left it where it was because we were on the outward swing of our walk and forgot to pick it up on the way back – but we might go pick it up again if we can thing of a good reuse for it.

The plastic looked too thin/brittle to warrant a repair job to be reused as a sledge but that doesn’t mean it has to head for landfill.

The first reuse idea that springs to mind is the ubiquitous planter – I can always use new planters. The holes were only about 1cm across – some crocks or a bit of liner would stop the soil falling out but provide adequate drainage – but I’d be a little cautious about growing food in there because it’s unlikely to be decent quality plastic and may leach all sorts of stuff into the soil.

What else could I do with it instead?

We’ve been using our dining table more recently – regular use stops it becoming a dumping ground for everything we own but can’t be bothered putting away properly. But because we’re newcomers to the idea of actually dining at a dining table (as opposed to using it as an office desk, which we’ve done until recently), we don’t have any placemats or anything like that.

Now I know I could just find some pretty fabric and whip up some mats on a sewing machine, maybe with a bit of batting/couple of extra layers of fabric in the middle to make them more heat resistant – but where’s the fun in that?

Have you made placemats by reusing/upcycling anything fun? I’d imagine old clothes are rip for upcycling since they’re just shaped fabric (for example, placemats from old t-shirts or from old jeans with cutlery pockets; I imagine felted jumpers would work too). Does anyone have any other ideas clothes recycling ideas?

And what about other ideas? John has been enjoying the patterns on logs recently – if we could take a thin slice from the ends of some pretty logs and varnish them, that might work. I’ve also got another half idea of weaving some mats using old packaging materials – some colourful card (although it would have to be at least wipe-clean), some plastic from bottles or drinks cans… Anyone done anything similar?

Would love to hear any and all ideas!

A bit of a blast from the past – GaryLamontL has asked @recycle_this on Twitter about reuses for wellies:

Just wondering if you have any ideas on what to do with 3 old pairs of wellies I have. They leak and I have enough planters!

We’ve covered this before but a lot of the ideas were planter-ish. So a fresh shout out – has anyone got any more reusing or recycling ideas for old wellies?

Philip Mitchell Graham has left us another suggestion/excellent upcycle idea:

Ironing boards. One of the great monuments to inbuilt obsolescence is the common ironing board. They are designed to break after a few years, because the folding mechanism is made of cheap mild steel and the legs often buckle if someone places a heavy load of washing on them.

No matter, use a bit of fencing wire to lock them in an open position, then use them as light work benches in the studio or garden. Sure they are light, but many tasks do not need a heavy table. If you have a few of them, you have in effect a modular bench system that you can reconfigure with no effort. They are light enough to move with one arm which is very useful if like me, you find yourself in need of a bench when you have one arm full.

I suspect our ironing board will outlive us since we use it that rarely (in fact we were utterly shocked to find we had one – we thought it had gone to the furniture charity shop before we moved house). It feels really flimsy though so I suspect if we used any more than once a year, it would fall apart in a shot.

I like Philip’s mobile workbench idea. With a tablecloth over it, it could also be an emergency table for a party or bbq.

Any other suggestions? What about if it can’t be fixed with garden wire – any uses for the metal pipe legs or the board itself?

Philip Mitchell Graham has left quite a few comments on the Suggest an item page recently so I guess I should start making my way through his ideas!

First up:

Old split plastic rubbish bins. I used one as a liner in an old metal rubbish bin. Metal bins often loose their bottoms, whereas the plastic ones often split on the sides. Between the two, I made a perfectly serviceable bin. I expect to get a few extra years of service out of two bins that had no future at all.

Great reuse Philip.

Without a metal outer, they’re useful for storing stuff that needs to be pretty dry but doesn’t need to be bone dry. We’ve got a split plastic bin in our woodstore for kindling – it keeps it neat and in one place, and not enough water makes it through the cracks to be a problem. If we had another, I’d probably use it for my garden stuff – spare pots and other bits and bobs – that don’t need to be in the greenhouse but need to be contained so they don’t get blown around.

Do you use old bins around your garden too? Do you have any other reuses for them?