We’ve had an email from Madhvi asking :

how can I creatively recycle old PVC pipes?

We’ve covered some reuses for guttering and drainpipes – which are increasingly plastic these days – but I thought it was worth asking Madhvi’s question because PVC pipes come in all sorts of diameters and lengths.

A few months ago, when I was looking to build us a laundry basket for the bedroom, I spotted this PVC pipe laundry hamper project, which I thought was a very neat idea. Depending on the size, that could possibly be made from offcuts or the idea shrunk down if you only had smaller pieces available. In a similar constructed-with-plumbing-joints vein, I also like the idea of this PVC pipe laptop stand and this bike stand.

As for smaller reuses without additional parts, I like this bathroom storage idea – I’m not sure how many people have two sets of curlers but it’s an adaptable idea, especially regarding the cables. You could use them to tidy up electric cables under desks/behind TVs etc – if all the cables go through sections of pipes, they’re less likely to be underfoot and get tangled. (If the end plugs are too wide to go through the pipe, you can cut slot in it to slide the cable through instead – this guy was doing it for something a little different but this is what I mean by a slot.) Similarly, you can use them instead of kitchen roll/toilet roll tubes for storing electric wires & extension cables when they’re not in use – we’re a geeky household, we’ve got a lot of spare wires ;)

And that’s all before we start thinking about ideas for the garden!

As for actual recycling, PVC recycling has increased over recent years but it’s still not as commonly collected for recycling as some other plastics (and it’s harder to recycle too). If you have a lot of pipes to get rid of, contact your local council’s waste department to see if they can accept them for recycling – or if they’re still in a new/usable condition, pass them on to someone else yourself through eBay, Freecycle/Freegle or Craig’s List etc.

How would you reuse or recycle old plastic/PVC pipes? Have you used them anywhere interesting around your home or garden?

Yesterday, I posted a question from James, asking for ways to reuse or recycle a whole kitchen, because he’s getting a new one. Thanks to everyone that has commented about that!

At the bottom, I mentioned reducing is the most important part of the recycling triangle. James already seems quite set on getting a new kitchen but other people approaching a similar “new kitchen?” position may want to revamp what’s there rather than starting again. By “other people”, I mean me ;)

Our kitchen is also 15+ years old, is looking rather tired (especially as half the kitchen has one cupboard design, the other half a different one) and the far end is generally pretty dark (as is obvious in the picture!). We did a few things to freshen it up when we moved here two and a half years ago such as repainting the walls a more neutral shade and replacing the very scuffed, dark green hob & sink with lighter alternatives (thanks eBay for second-hand bargains for both!).

More recently (as this week – it’s still drying), we’ve had the nasty grease-attracting spiky artex ceiling reskimmed so once painted, that’ll look fresher and as well as redecorating again, we’re going to add some tiled splashbacks (since there aren’t any at the moment – mucky walls a go go!). We’re hoping to find a replacement for the badly fitted dark vinyl flooring too and improve the lighting somewhat. Will it be as nice as a new kitchen? No — but it’ll hopefully be good enough and more practical so we won’t need to decorate again for a good while (I hate decorating). I don’t think I have the skill or space to do an adequate job of repainting the cupboards (which would make the mismatched doors more uniform) but I’m hoping everything else will freshen it up enough.

Have you revamped an old kitchen to save replacing it? Do you have any tips or suggestions?

Did you include any reclaimed, recycled or upcycled elements in your “new” kitchen? I’d love to hear your stories for inspiration!

I’m back post-lurgy and I thought I’d post this great question from James – asking how to recycle a whole kitchen:

We shall be replacing our kitchen in the next few months. The present one is 15 years old and is perfectly serviceable. I don’t want to “skip” it. Any suggestion as to how I can recycle it?

My first suggestion would be to try to pass it on – lots of people would love a kitchen revamp but can’t afford to go the whole hog so just replace cabinet doors etc. I regularly see sets of door & drawer fronts offered up on eBay, Gumtree or Freecycle/Freegle (and probably Craig’s List in the US). Built-in appliances can be sold/passed on separately too as they often expire before the rest of the kitchen so people might want to replace just those bits.

People don’t just use them for revamping their own full kitchens either – someone might want to make a “tea station” at a community venue, or for storage in a porch/understairs cupboard – so if you’ve not got a lot, someone still might want them for that sort of thing instead. And tatty but still usable cupboards and worksurfaces are still useful in places where function very much trumps form like a garage, cellar or shed – and old sinks are often useful in those places too. We recently covered ways to reuse old ovens (and toaster ovens) too so again, people might want those for non-culinary pursuits where aesthetics are less important.

As for more creative reuses (rather than just reusing stuff for its original purpose), I’ve made oversized planters from wooden cupboard doors before, I’ve seen people making pretty serving trays from doors and Alison Bailey Smith curated an art project last year where people used her old kitchen as art materials.

(Of course, I also have to mention the most important point in the recycling triangle – reduce. New kitchens are very resource intensive and a greener option would be to revamp an old kitchen rather than replacing it with all new …. but you know what, I think that’s a whole ‘nother post for tomorrow! ;) )

Any other suggestions for ways that James could recycle his whole kitchen? Have you given away an old kitchen – or got one from someone else? Any tips?

(Photo by cgarbiano)

Whitney has emailed us, asking about margarine tub lids:

i’m trying to do my part and make sure that i recycle everything that i can, or at least find a way to reuse it. i recycle my #5 containers of cream cheese, margarine, etc, but have nothing to do with the lids, which even if they are also #5 they are not accepted in my recycling.

any ideas of what i can do with them? typically i just put them under plant pots, but i can only have so many plants. and i thought about making coasters, but i don’t really use coasters, so i’m open to some new ideas!

When we get this type of tub, we tend to keep both the lid & the tub to reuse for leftovers instead of Tupperware or use as small storage boxes in other parts of the house (eg, we’ve got one for batteries, one for fuses and one for shoe polish in our misc cupboard). But there are a lot more uses for the tub part than the lids so I imagine there are a lot of lids going in the bin — let’s see what we can do with them :)

Funnily enough, a lot of my ideas are the same as the ones from Monday’s handicapped tags – add them to your tool box for use while decorating/painting, cut them up for plant markers in the garden, cut the rim off and shape the remaining plastic to use as a dough scrapper etc.

Anyone got any more original ideas though? :)

(Photo by cogdogblog)

(This isn’t strictly a recycling issue but I was thinking about it the other day and I’d love to hear your thoughts on the matter!)

A few miles down the road from me is a village called Saltaire.

It is a Victorian model village founded by a local mill owner (Sir Titus Salt) so his employees had somewhere nice to live compared to the slums around mills in the rest of Bradford. It’s still a nice place to live – rows upon rows of well built Yorkshire-stone houses, with a lovely park, a very pretty church, lots of independent shops and the old mill, which is now home to an art gallery, restaurants & cafés, and more specialist shops. The whole area has survived the last 160 years in a remarkable complete state and was listed as a UNESCO World Heritage Site in 2001, which means that the government has a duty to protect the site from future development.

Without the World Heritage Site protection (and the listed status all the individual buildings around the village as well), various parts of the village would probably have been redeveloped or demolished in the name of progress – for example, there is a traffic crunch point just near the village and various people are crying out for a bypass or a tunnel underneath the whole area. With regards to that sort of thing – and to preserve our cultural history, I’m all in support of having listed buildings and the Heritage Site protection but…

I was passing through the village the other day and I noticed that most of the houses & shops still have old, single glazed windows. A lot of the windows have pretty curved tops – like in the picture – so I imagine they’d be expensive to replace anyway, before getting into issues of whether or not it’s allowed. (There are some houses in a less picturesque part of the city which have clearly just had rectangular windows placed en masse behind the arched stone window – but that does look bodgy and would definitely not be allowed in Saltaire.) A few houses seemed to have secondary glazing inside which helps a bit but I imagine the rest are losing a fair bit of heat through the single glazed windows and are probably draughty too. Similarly, a lot of the smaller terrace houses don’t have a hallway – their front doors open straight into their living rooms – and from living in a house like that for ten years, I can tell you for sure that it can be a draughty heat-sink even when you don’t actually open and close the door.

Many of the houses in Saltaire face east-west so they wouldn’t be optimal for solar panels anyway but even if they had south-facing roofs, I’m guessing that wouldn’t be allowed — any listed building is likely to require “listed building consent” before solar panels can be installed and it’s often refused if it’s felt the panels would “detract from the appearance and character” of the building or area or “disturb or destroy the historical fabric”. The situation would be similar for micro wind turbines or biomass flues etc.

Of course, these issues aren’t specific to this village – there are over 370,000 listed buildings in England alone – but passing through Saltaire got me thinking and I wondered what you thought about it. While most of us want to do so to stop wasting energy & money, a lot of people with listed houses can’t do the same.

Do you think the properties that represent our past should be protected above all else? Or should there be a focus on energy-awareness for the present & the future instead?

Do you live in a listed building? Have you had any problems making it more energy efficient? Or conversely, is it easier than it seems like it’ll be?

(Photo from Wikipedia)