A couple of weeks ago, I spotted an article someone was promoting on Twitter about “sprucing up your tired winter coat“. Ooh! I thought, I like sprucing! It’s a great way to upcycle & reduce after all — but when I clicked over to the article, I found the sprucing involved the addition of various belts, brooches and doohickeys, which is fine but not very me.

For me, it’s both a “repair this” and “reduce this” type question – how can I refresh that tired winter coat so I don’t need to buy a new one? I think it’s important that it not just so that it looks better but that I feel better about it too.

I basically have three coats for throughout the year – a light cotton hoodie (which I wear most of the year), an expensive-for-me big super-warm cotton parka type coat for freezing days, and a cheaper, shorter “wool” one which I wear when it’s not quite so cold and I need to look a bit neater than in the parka.

So how can I freshen those up?

For me, there are two main areas that get tired dirty – my cuffs and my pockets. The hoodie gets thrown into the wash regularly, hurrah for cotton. The parka & wool one aren’t as easily washable, especially mid-winter but spot-washing on the cuffs improves things a lot. As for the pockets, I treat my pockets like some women treat their handbags – a site for the accumulation of detritus. This is sometimes good (I found a fiver in my parka coat when I put it on the first time this year!) but mostly bad (crumbs of dog biscuts, bits of paper, sticky sweets). Emptying out the junk & cleaning out the crumbs and dirt from the pockets won’t make it look any better (although a lot of junk does ruin the line of the coat), but it’ll make it feel better for me and enjoy using it more.

Another thing: my wool one – it’s not 100% wool but wool-heavy and it’s that heavy woollen style – is bobbly. A bit of combing with a debobbler would make it look a lot tidier. I suspect there will also be some snags too which could be tidied up. I’m also going to debobble/de-snag my scarves, gloves & mittens for good measure.

Yet another thing: the zips on my hoodie and parka coat have been playing up recently – I could secure the bottom zip section in place with a couple of stitches and rub a little soap on the teeth to stop them snagging, and it would make zipping up a less frustrating experience.

Another, more involved thing: the lining on the wool-ish one has always bugged me – it’s icky polyester and now it’s torn a little too. I could use an old fun-patterned shirt to replace it – using the original lining as a pattern – an upcycling idea and revamp in one.

So that’s what I do/will be doing. Have you got any ideas for ways to freshen up an old coat?

(Photo by sh0dan)

After a couple of years of faithful service, one of my beloved bras has broken. It’s one of the two really quite expensive bras I own – they cost a lot of money but worth it — supportive, comfortable to wear and resulting in (what is I’ve been told is) a pleasant boob shape.

Because it was great quality to start with, it’s in pretty good condition – except that one of the underwires has snapped. My mum suggested removing both of the underwires and wearing it as a non-wired bra. I think I need more support than that for daytime wear but it’s definitely a last-resort option.

I think I’d prefer to replace the underwire if possible — I have a collection of underwires (and hooks & eyes, and straps) from old bras in my craft box but they were mostly from my smaller-boobed days so I’m not sure they’ll fit. It’s certainly worth checking though. Other than that, Google tells me it’s possible to buy replacement underwires at haberdasheries – although I can’t say I’ve seen them.

Anyone got any advice on replacing an underwire?

Also, anyone managed to successfully fix a bra when the underwire is popping out of its pocket and jabbing you in the cleavage or armpit? I’ve tried sewing up escape holes on a number of occasions (with different bras) but the wire has always found a way through the stitching again — is a mini-patch the answer?

Another problem that I sometimes have is when the “catch” (for want of a better word) on the strap starts to slip and the strap lengths & my boob sags further as the day goes on. Anyone got any suggestions for fixing that? Or replacing a strap/the little loop at the bottom of the straps?

Any other bra breaks/fixes?

We had an email from Richard the other day:

I have recently designed and restored a cast iron roll top bath. I’ve taken an antique original bath and I have recently designed and restored a cast iron roll top bath. I’ve taken an antique original bath and have given it a bespoke twist using ceramic handmade mosaics as decoration. With the iron legs chromed too I feel it would stand out in any bathroom.

Replica cast iron baths take large amounts of energy to produce and thus leave a large carbon foot print. This is my greener alternative!

This is a great idea – there are so many old baths dumped because they’re no longer pretty but this now is pretty flash.

Our bath in our last house was very old – the original one when bathrooms were installed in the houses in the 1960s (when the council decided that the 60 year old houses weren’t actually “temporary housing” as planned) – and as a result, the enamel was damaged & stained by water deposits. It was always our plan to explore re-enamelling it but as with many things in our lives, we never got around to it. Has anyone else had any experience re-surfacing a bath? Did you do it yourself or is it a job for a professional?

A lot of baths nowadays seem to be made from plastic or fibreglass – not quite so cold but more prone to cracking that a solid hunk of metal. Has anyone fixed a damaged plastic/fibreglass bath?

Two “repair this” posts in a row – something I usually try to avoid but this is a bit of an urgent one from Kate:

Help! My wellies are leaking! How can I fix them?!

It’s a similar, just slightly more heavy duty, problem to that of my leaky trainers – you need something that will seal the hole but remain flexible (unlike, say, superglue) because it’ll crack when dry. Alice’s waterpoof trouser question might also suggest some mending solutions.

My first thought was puncture repair kit – something suggested a lot to solve my trainer problem – but a quick Google suggests that’s not guaranteed to work. Further in that forum thread, someone mentions that wellington boot repair kits exist – presumably just a heavier duty version than standard bike tyre puncture repair kits.

If it’s only a small leak, a quick bodge not-really-fix would be to put your socked feet into plastic bags before sliding them into your wellies – at least that would keep your feet dry. Depending where the hole/split is, a strip of gaffer tape might also help reduce moisture incursion in the short term until a more permanent fix can take place.

Any other suggestions?

(If you can’t fix them and end up getting a new pair – don’t forget to reuse or recycle your old pair.)

I suspect this is a lesson in why you shouldn’t clean wearing nice clothes and definitely why you shouldn’t use bleach, m’kay but I thought I’d ask anyway.

I managed to flick bleach all over one of my favourite t-shirts but I’m not quite ready to give up on it just yet. The shirt has a printed design on it so I can’t bleach and re-dye the whole shirt.

Googling around, I’ve seen some suggestions of disguising the pale dots with permanent marker – the shirt is brown though so I don’t know if I’ll find a pen to match.

The design is a bright cartoon design so I might get away with adding some “noise” to the picture with fabric paint or reverse/normal appliqué.

Failing all that, I guess I could make something else with the fabric/design or since it fits well, take it apart to make a pattern to use to make my own fitted t-shirts in the future. I’d really like to keep it as a tshirt though – any other suggestions?